Phil Lavin’s Articles at Phil’s Blog, Page 3

Juniper MX: Simple static VXLAN configuration

On most VXLAN deployments, you’ll want to be using EVPN to distribute MAC addresses between devices. However, if you’re doing

Apparently kill -9 always works… except when it doesn’t. It also so seems that 99% of the time, when it

Having recently gone through the APNIC application process (and been accepted as a member), I thought it worthwhile writing about

Probably not an overly common setup but you’ll inevitably become frustrated if you try it. As per this Juniper PR,

Both rib-groups and instance-import allow you to selectively (or non-selectively) import routes into one VRF from another. I won’t go

This was far more difficult than it should be so it’s worth writing down… First, check the Juniper Port Checker to

You might see this error when using VXLAN on Juniper kit after you set an interface to be a member

Dell’s 14th Generation servers have the option of shipping with Perc H740P RAID controllers. These are stonkingly good, as compared

First, shut down the container and ensure it’s not running. List out the LVM logical volumes: Choose the disk you